|
Custom Made Fly Rods
HandCrafted in the U.S.A.
15% Discount to all branches of active duty U.S. Military personnel !
" Proudly saluting men and women of the U.S. Armed Forces for commendable service and bravery."
Rod Tapers
Split-bamboo rods currently in production are of hexagon (6-sided) geometry.
Each is individually custom crafted using the taper of your choice to exact specifications.
Available split-bamboo fly rod tapers encompass a wide spectrum of casting preferences
which vary from fast, moderate (mid-flex) and slower to full-flex parabolic rod actions.
The on-file taper library incorporates a multitude of archived patterns that range
from many of the old classics and vintage tapers to contemporary rod design,
most of which can be modified to compliment all preferred fly casting styles.
Simply specify a rod taper or the type of action desired, then select
from either of the two base model fly rods found below.
Design
Made with meticulous detail and care - start to finish.
Only seasoned Tonkin bamboo culms with the highest power fiber density are chosen for use.
Select bamboo is twice flame-tempered to eradicate moisture content and provide fiber strengthening
heat treatment - followed by a second flaming application to achieve desired color/appearance.
Flame-tempered cane is offered in light, medium, and rich, dark tones. Mottle-flamed cane by request.
Every fly rod is individually custom crafted from the same tempered culm of bamboo
and offered in a variety of lengths ranging from - 5' to 9' feet - fabricated
as a one (1) tip fly rod or in the "traditional" two (2) tip configuration.
- Please refer to the "caneworks" page to view various photos of flamed culms -
The select Tonkin bamboo and fabrication process is always the same.
Whether you desire a 2 piece rod with the standard components package or a 3 piece rod
with Deluxe components - you are always assured a high quality custom rod to choose from.
Both models feature a standard 3 x 3 node spacing pattern designed with matching mirrored tips.
Custom four (4) piece fly rods up to nine (9') feet can be made - upon special request.
Split-bamboo spinning and casting rods are also constructed in several lengths (scroll down).
HollowBuilt construction is an available option for all split-bamboo rod models.
Flexibility. The operative word when choosing the design of your custom rod.
Options
Standard features and Accessories include:
Choice of transluscent or opaque variegated Jasper guide wrap windings in five [5] color options:
(Scarlet/black), (orange/black), (yellow/black), (green/black) & (white/black) combinations.
Premium quality 18% German Nickel Silver ferrules are standard issue on fly rod models.
High gloss marine spar-urethane multi-coat finish for superior lustre, lasting durability
and the maximum protection from heat, weather, harmful UV rays and moisture.
Aesthetic, light-weight and super-durable anodized or plated reel seat components
matched with high grade pre-formed cork grips and quality double foot snake guides.
Mildrum (Belmar type) SRMG arched high frame stripping guide with highly durable
carbide rings & nickel silver frames add a unique and distinctive vintage style look.
Partitioned cloth rod sock and brass capped satin finish aluminum rod tube w/logo.
Hook-tender will be supplied (if requested) - free of charge.
~ Optional Deluxe N/S Component Package ~
-
Polished Struble Nickel Silver reel seat hardware
-
Fine custom Rattan-wrapped cork grip
-
Eye-catching wood reel seat spacer insert
-
Genuine agate or agatine stripping guide
-
Snake Brand premium double foot chrome guides
-
- substitutions/exclusions negotiable -
Deluxe N/S Component upgrade (2 or 3 piece rod) . . . . . . . . . . . $200.00
* Please refer to the "fine components" page to view a selection of Deluxe rod accessories *
Extra's
HollowBuilt construction . . . . . . . . . . . . . . . . . . . . . . . . . $125.00
Blued/oxidized nickel silver hardware upon request . . . . . . . . . . . . . $75.00
Trim wrap tipping service provided at an additional charge of . . . . . . . . . . . . . . $35.00
Special request mottle-toned bamboo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $50.00
Requests for all other specialized custom embellishments will be upcharged, respectively.
Deposit
An advance deposit is required to initiate split-bamboo rod customization :
$275.00 deposit on DELUXE series fly rod models.
$225.00 deposit on STANDARD series fly rod models.
$175.00 deposit all Spinning & Casting rod models.
25% of the total cost for custom split-bamboo rod blanks.
Please note that deposits are non-refundable
A Primer on the Method of "HollowBuilding"
This process is referred to as the chambered 'Bridge & Dam' method:
After final hand-planed dimensions are achieved the hollowbuilding procedure is performed. Done with precise detail - these solid bridges and dams are carefully channelled by hand at designated intervals to remove excess material along the internal length of the six tapered, triangular bamboo splines thereby forming semi-hollow chambers throughout
the interior walls and apexes of the rod blank.
Lighter, responsive accuracy.
HollowBuilding is a dynamic innovation that has been used for many years. In conjunction with the overall rod making process, this popular, highly regarded feature distinctly allows the fibrous properties and attributes of split-bamboo to retain the "natural and classic feel" it is so widely known for, while further maximizing the way in which a fly rod casts. It proves also to be greatly beneficial when striving to meet the needs of today's angler in search of high performance, lighter-weight bamboo fly rods with perfected line control and casting accuracy - without sacrificing power or the characteristics of how a specific bamboo fly rod taper is designed to perform. When a split-bamboo fly rod has been "synched" properly - (placing the line guides upon the weakest flat) and further coupled with the "built-in" efficiency of hollowbuilt construction the results indicate through extensive field-testing that the functional benefits in tandem produce a lighter-weight, optimized split-bamboo fly rod possessing smooth, seamless power and delicate, pinpoint accuracy that ultimately transfers pleasing results on to the flycaster.
HollowBuilt fly rods are known to "track & recover" with accurate fly placement
and improved line control - complimented by a significantly lighter feel in hand.
HollowBuilding is a reasonably priced recommendation
provided at about (1/2) - half the cost - found elsewhere.
Please refer to the "caneworks" page to view photos of the HollowBuilding process
-------------------------- Paradigm proudly offers: --------------------------
* THE SPARTAN II ~ "Guru" Series *
Signature Craftsmanship - Durable, Aesthetic Lightweight Components
- Two Piece Configuration -
Outfitted with the "Standard" component package, this two piece model
makes for a superb inexpensive 'entry level' custom split-bamboo fly rod.
Fabricated as a 2/1 (one tip) rod or in the "Traditional" 2/2 (two tip) configuration.
"The only thing 'entry level' about this handcrafted custom fly rod is the affordability!"
Two (2) piece model offered in :
- 5' to 8' foot lengths -
Lengths: 5', 5'6", 6', 6'3", 6'6", 6'9", 7', 7'2", 7'6", 7'9", 8'
Popular lengths: 6', 6'3", 6'6", 7', 7'2", 7'6", 7'9", 8'
Standard 2/1 . . . . . . . $625.00 Traditional 2/2 . . . . $750.00
prices reflect the Standard component package
Deluxe model components upgrade + add . . . . . $200.00
- plus S/H & Insurance -
HollowBuilt construction available on all 2 piece fly rods
for only $125.00
$225.00 non-refundable advance deposit required on Standard Series fly rod models.
* THE SPARTAN III ~ "Vagabond" Series *
Signature Craftsmanship - Superior Quality High End Components - Packable
- Three Piece Configuration -
Designed for the 'aimless wanderer' in us - - the next tier fly rod,
appointed with fine, Nickel Silver fittings and Deluxe accessories.
In a three (3) section configuration for optimal stow and portability.
Fabricated as a 3/1 (one tip) rod or in the "Traditional" 3/2 (two tip) configuration.
"An exquisitely custom fly rod in a compact design - perfect for travel and value priced."
Three (3) piece model offered in :
- 6' to 9' foot lengths -
Lengths: 6', 6'6", 7', 7'2", 7'6", 7'9", 8', 8'3", 8'6", 8'9", 9'
Popular lengths: 6'6", 7', 7'2", 7'6", 7'9", 8', 8'6"
Deluxe 3/1 . . . . . . . . . . $875.00 Traditional 3/2 . . . . . . $995.00
prices feature the Deluxe components package
Standard components - deduct . . . . . $200.00
- plus S/H & Insurance -
HollowBuilt construction available on all 3 piece fly rods
for only $125.00
$275.00 non-refundable advance deposit required on al Deluxe series fly rod models.
Please allow eight to ten (8-10) weeks to complete and deliver each custom fly rod fabrication.
Custom Spinning and Casting Rods
* THE OSPREY ~ RiverGuide & LakeMaster *
If your niche is stillwater or angling streams and lakes with spinning or casting gear
I can also make the appropriate bamboo rod to suit all of your freshwater needs.
The 'Guide' model is the spin rod version, 'LakeMaster' model is a baitcaster.
These bamboo rods are available only in hex (6-sided) geometry as well.
Made in lengths ranging from 5' to 8' feet and presented standard as
a 2/1 (two piece rod: butt section & one tip section) configuration.
Each split-bamboo bait casting or spinning rod is expertly made
from the same culm, handcrafted with these custom features:
~ Highly durable chrome-plated brass ferrules
~ 3 x 3 or random node spacing design
~ Top quality reel seat hardware with
Premium guides and tip-top
~ High grade cork grips
~ 5' to 8' foot lengths
~ Choice of guide wrap colors
~ No extra charge on wrap tipping
~ Hook tender (upon request)
~ Multi-coat spar-urethane finish
~ Partitioned cloth rod sock included.
~ HollowBuilt construction available.
Safely packed and shipped in a crush-resistant PVC tube.
Pricing for two-piece models (one tip) . . . . . $495.00 - plus S/H & Insurance -
As a 3/1 (3 pc.) model $575.00
Extra tip option $195.00
2 pc. nickel silver ferrules option $70.00
3 pc. nickel silver ferrules option $95.00
HollowBuilt construction $125.00
Aluminum rod tube w/logo $35.00
All other specialized custom embellishments will be up-charged.
$175.00 non-refundable advance deposit required on above Osprey models.
Please allow up to eight (8) weeks to complete and deliver each custom spinning or casting rod fabrication.
Custom Bamboo Rod Blanks
With consideration, I am offering un-varnished split-bamboo rod blanks for the custom rod builder to finish out. All blanks will be 'made to order' per designated tapers specified exclusively by the customer in 2 & 3 piece configurations, (4 pc. on request) with options for NS-ferruled, un-ferruled & other Add-ons below:
2 piece blanks
Any 2/1 blank up to 8' feet in length . . . . . . $295.00
Any 2/1 ferruled blank up to 8' feet . . . . . . $350.00
Any 2/2 blank up to 8' feet . . . . . . . $425.00
Any 2/2 ferruled blank to 8' feet . . . . . $495.00
3 piece blanks
Any 3/1 blank up to 9' feet . . . . . . . $325.00
Any 3/1 ferruled blank up to 9' feet . . $400.00
Any 3/2 blank to 9' feet . . . . . $450.00
Any 3/2 ferruled blank to 9' feet . . . . $595.00
"Add-on's"
HollowBuilt construction . . . . . . . . $125.00
Spar urethane gloss finish . . . . . . $ 50.00
Aluminum rod tube w/logo . . . . . $ 35.00
Partitioned cloth rod sock . . . . . . . . . $ 15.00
4 piece custom bamboo blanks . . . . . . . $ - Call
Order a HollowBuilt custom rod blank & take 10% off your total order!
Above blank models require a 25% non-refundable deposit in advance.
Prices are not inclusive of shipping, handling and insurance fees.
* Please allow up to four (4) weeks for all custom bamboo blank fabrications. *
Handcrafted With Pride in the U.S.A.
tel: (303) 946.3451
*** Prices are subject to change at any time
Basic Steps in Constructing a Split-Bamboo Fly Rod
Rough Canework (approx. elapsed process time for a 2 pc. fly rod)
1. Bamboo culm preparation.
a) measure and cut culm to desired length for each rod section
b) hand file and sand exterior nodes Time required: 4-6 hrs.
2. Cane tempering.
a) Apply flame to the culm sections for initial heat-treating (drive out moisture).
b) Follow with a second application to achieve desired tone. Time required: 4-6 hrs.
3. Split (by hand) sectioned culm into 18 to 24 strips.
a) separate strips by individual rod section
b) remove the interior nodal dam, square the strips
c) mark and bundle by respective section Time: 4-6 hrs.
4. Select strips by individual section for type/length rod.
a) layout for node spacing
b) cut to desired length for roughing form Time: 2 hrs.
5. Heat and compress nodes.
a) straighten and square strips
b) sand exterior nodes again
c) re-bundle Time: 4-6 hrs.
6. Hand plane strips per individual rod section in roughing form.
a) Create 60 degree equilateral triangle. Time: 8-10 hrs.
7. Eradicate moisture content (final heat-treatment)
a) Place bundled strips in oven @ 350 degrees for 15 mins. Time: 2 hrs.
Final Hand Planing
8. Dial-in/set individual taper dimensions for respective rod section on adjustable planing form.
a) final hand planing per each section. Re-set dimensions, final planing - repeat for 3 piece rod, etc.
b) scrape and sand all strips to prepare for laminating Time: 6-8 hrs.
9. HollowBuild at this juncture - if required. Time: 4-5 hrs.
10. Rod blank fabrication.
a) apply adhesive to laminate strips
b) send glued strips through binder
c) hang laminated strips to dry allow 24 - 48 hours cure time Time: 3-4 hrs.
11. Scrape and sand all rod blank surfaces to remove binder cord, adhesive material and enamel.
a) cut blanks to specified length
b) straighten rod sections with heat (if necessary) Time: 4-5 hrs.
Ferrules
12. Install ferrules.
a) measure and mark ferrule stations on rod sections.
b) size and turn respective ferrule stations to fit (by hand)
c) clean all internal ferrule parts thoroughly
d) crown and feather ferrule tab serrations, clean again
e) glue and install ferrules allowing 24 - 48 hour adhesion time Time: 3-5 hrs.
13. Lap & fit ferrules by hand (female to male slide). Time: 1-2 hrs.
Rod Finishing Steps
14. Varnish and finish preparation.
a) sand and clean blanks dust free
b) initial varnish coat - dip or hand rub (allow 3 days drying time)
c) light sanding, clean dust free
d) repeat if necessary Total time: 5 hrs.
15. Install hardware ie; reel seat, grip, winding check, etc.
a) Synch and "spine" the rod.
b) affix tip-top to tip section(s) allow 24 hrs. component adhesion Time: 2-3
16. Determine guide spacing. Time: 1-2 hrs.
17. Attach line guides and hand-wrap the windings.
a) "Opaque" wraps; apply 2-3 coats of CP to thread windings.
apply 3-5 coats of marine spar urethane (2 coats per day)
b) "Transluscent" wrap effect; coat the thread windings with 6-8 coats of diluted spar urethane solution.
(2 coats per day) allowing 12-24 hours between each two-coat application.
c) ink the rod (add personalization inscription) allow 24 hrs. Total time: 12-16 hrs.
18. Two final dipped coats of marine spar urethane. Allow 10-14 days for finish to "semi-cure". *
*(full cure time for most varnish/urethane products is typically 2-3 months) Total time: 4 hrs.
19. Final rod inspection.
20. Package and ship to customer.
Go fishing with your new custom rod !
* Please note that the information above is only a basic step-by-step overview outlining most of the necessary steps used
and does not specify all of the "intricate" details involved in custom split-cane rod fabrication.
Copyright 2008-9-10 P.C.R.D.
All rights reserved.
|
